Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Geotechnical systems
with TITAN micropiles
One system – many applications
The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.
Trench shoring systems
The ISCHEBECK trench shoring systems in steel and aluminium meet the requirements for fast progress on site, economic plant use and high safety. The modular system consisting of panels and trench struts ensures good flexibility and solutions to suit the needs of building sites.
Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Formwork
Formwork solutions from ISCHEBECK are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All ISCHEBECK formwork products are versatile in use and carefully matched to the particular needs of building sites.
Centering and engineering structures
ISCHEBECK can supply many different solutions that cut formwork setup times.
The modular form of numerous products and systems allows them to be easily combined.
Safety and logistics in construction
TO DIN EN 13374 CLASS A
Fencing off an edge from which persons could fall should never take longer than the work to be done near that edge.
It is the small number of parts and the ease of use that are the real benefits of ISCHEBECK edge protection systems. The systems are flexible in use and represent a major contribution to the safety of persons on building sites.
Centering and engineering structures
ISCHEBECK can supply many different solutions that cut formwork setup times.
The modular form of numerous products and systems allows them to be easily combined.
TITAN Aluminium Megashore system
Flexible - economic - safe.
National Technical Approval and verified typical calculations to DIN EN 12812
The versatile answer for carrying all kinds of loads: in situ concrete floor slabs, precast concrete elements and steel structures. The modular system of choice ‒ lightweight, robust, high-grade aluminium
- Quick and easy erection
- Heights up to 24.60 m covered by verified typical calculations
- Leg loads up to 128 kN
- Simple design aids (design tables)
Mobile formwork
Support system for roof slab and walls assembled from TITAN Aluminium Megashore components
Support system for roof slab and walls assembled from TITAN Aluminium Megashore components
Whether for road or rail tunnels, entrance or exit ramps, underpasses or subways, open or closed, the ISCHEBECK mobile formwork system fulfils the most diverse requirements:
- quick, easy erection
- high load-carrying capacity
- low overall weight for easy repositioning
TITAN aluminium formwork beams
Versatile - lightweight - strong
Versatile - lightweight - strong
Whether as primary or secondary beams in floor slab formwork, as additional beams in scaffolds or as bridging beams for high loads, aluminium formwork beams are the best choice every time.
- High-strength aluminium
- High loadbearing capacity for low self-weight
- Robust and unaffected by the weather
- Lengths to suit the needs of contractors
TITAN WK wall-mounted supports
Carrying loads while keeping the floor clear ‒ the alternative to falsework with elaborate temporary foundations
Carrying loads while keeping the floor clear ‒ the alternative to falsework with elaborate temporary foundations
WK 1000 and WK 2000 wall-mounted supports:
- National Technical Approval Z-21.6-2001
- No need for impact protection
- Can be fixed at any height
- Ideal for creating large access openings
- Only a few parts
- Fixed in place with cast-in, recoverable screw anchors
- Screw anchors can also be fixed to existing concrete (core-drilling)
Accessories
Useful aids for the most diverse formwork situations:
- TITAN wedge jacks
- TITAN burn-off bearing pads
- TITAN screw anchors
- TITAN tie rods
- TITAN universal beam clamps
- Aluminium H20 beam clamps
- Screw jacks
For details of these products please consult the appropriate brochure.
TITAN WK wall-mounted supports
Carrying loads while keeping the floor clear ‒ the alternative to falsework with elaborate temporary foundations
Carrying loads while keeping the floor clear ‒ the alternative to falsework with elaborate temporary foundations
WK 1000 and WK 2000 wall-mounted supports:
- National Technical Approval Z-21.6-2001
- No need for impact protection
- Can be fixed at any height
- Ideal for creating large access openings
- Only a few parts
- Fixed in place with cast-in, recoverable screw anchors
- Screw anchors can also be fixed to existing concrete (core-drilling)
TITAN recoverable screw anchor
M 36/D 20-Ø 70x450
M 36/D 20-Ø 70x450
Made from quenched and tempered steel for high axial and shear strength. Can be cast in during concreting or subsequently inserted in a core-drilled hole. After removal, no metal parts remain in the concrete.
WK 1000 aluminium wall-mounted support
up to 100 kN
up to 100 kN
The WK 1000 aluminium wall-mounted support is suitable for light to medium loads of up to 100 kN (permissible load irrespective of screw jack extension). Owing to its low weight, the WK 1000 is suitable for manual installation, even in places with difficult access.
- Verified typical calculations
- Weight: 27 kg
WK 2000 wall-mounted support
up to 240 kN
up to 240 kN
Very long spans, e.g. over access openings, are possible with the WK 2000 wall-mounted support. It is also possible to slide a complete superstructure formwork assembly on roller skates.
- Verified typical calculations
- Weight: 150 kg
TITAN bridging beams
Type 2 comparable with HEB 200
Type 3 comparable with HEB 240–280
Type 2 comparable with HEB 200
Type 3 comparable with HEB 240–280
TITAN aluminium beam couplers are used to create shear-resistant connections in a stack of two or three TITAN 225 beams to produce a bridging beam with a higher load-carrying capacity.
- The much lighter alternative to a steel beam (type 2 = approx. 22 kg/m, type 3 = approx. 36 kg/m)
- Six beam lengths (3.60 – 4.20 – 4.80 – 5.40 – 6.00 – 7.20 m)
- With verified typical calculations
- Lightweight aluminium parts for easier dismantling
TITAN 500 wedge jack
up to 420 kN
up to 420 kN
- robust
- little settlement
- less expensive than hydraulic systems
- verified typical calculations
TITAN 1000 wedge jack
up to 1000 kN
up to 1000 kN
- extremely robust
- little settlement
- less expensive than hydraulic systems
- verified typical calculations
TITAN universal beam clamp
Up to 70 mm clamping capacity
Up to 70 mm clamping capacity
- Forged body for high clamping force with low weight
- 4-point support
- Also suitable for tapered flanges
