International Symposium on Landslides
February 22 to 26, Cartagena, Colombia
** Virtual Event **
Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Geotechnical systems
with TITAN micropiles
One system – many applications
The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.
Trench shoring systems
The ISCHEBECK trench shoring systems in steel and aluminium meet the requirements for fast progress on site, economic plant use and high safety. The modular system consisting of panels and trench struts ensures good flexibility and solutions to suit the needs of building sites.
Geotechnical systems
with TITAN micropiles
One system – many applications
The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.
Smart TITAN
Designing TITAN Micropiles online
Quick and easy (preliminary) design
FOundations and underpinning
with TITAN micropiles
TITAN micropiles transfer tension, compression and cyclic fluctuating and reversed loads to loadbearing soil strata according to DIN EN 14199.
- Little settlement
- Can also be installed with compact, lightweight plant
- Low-vibration method that does not damage existing buildings
- Ideal on confined sites
- Permanent solution for 100+ years
ANCHORAGES
with TITAN micropiles
The economic alternative to ground anchors
TITAN micropiles can carry tension loads without prestressing and are suitable for temporary and permanent applications (100+ years). Monitoring is unnecessary.
TITAN micropiles are installed to anchor sheet piling, retaining walls or excavation shoring, e.g. for
- flood defence walls, quayside structures and locks
- edge beams, historic masonry and gabion walls
- bearing pile, bored cast-in-place and diaphragm walls
SOIL NAILING
with TITAN micropiles
Self-drilling reinforcing element to DIN EN 14490
TITAN micropiles can be used as self-drilling reinforcing elements for nailing to DIN EN 14490. The hollow steel bars are installed with drilling and flushing fluid and subsequently grouted with a cement suspension in a dynamic process. These create a monolithic composite element together with the surrounding soil and thus function as a ground improvement measure.
The TITAN system ensures permanent corrosion protection and is approved for applications lasting 100+ years.
TUNNELLING & MINING
with TITAN micropiles
ONE SELF-DRILLING SYSTEM – MANY APPLICATIONS
The TITAN system is ideal for all kinds of temporary and permanent stabilisation solutions in tunnelling and mining projects.
- Drilling and installation is one operation
- Especially advantageous in rocks/soils with low cohesion and in unstable boreholes
- Borehole stabilisation with cement slurry (optional)
- Dynamic grouting during drilling (optional)
- Grouting assured over full depth of borehole
- No need to extract drill strings
ONE INSTALLATION METHOD
FOR ALL APPLICATIONS
FOR ALL APPLICATIONS
Irrespective of the ground conditions and the particular application, TITAN micropiles are always installed using the same method.
- Also suitable for changing soil conditions
- No separate casing
- No multi-stage grouting
- Installation according to approval Z-34.14-209
- 1 operation – 2 steps
TITAN micropile
COMPONENTS
COMPONENTS
APPROVED SYSTEM
TEMPORARY & PERMANENT
TEMPORARY & PERMANENT
TITAN micropile
- Complies with DIN EN 14199
- National Technical Approval Z-34.14-209 (DIBt)
More Info
References
TUNNELLING & MINING
with TITAN micropiles
ONE SELF-DRILLING SYSTEM – MANY APPLICATIONS
The TITAN system is ideal for all kinds of temporary and permanent stabilisation solutions in tunnelling and mining projects.
- Drilling and installation is one operation
- Especially advantageous in rocks/soils with low cohesion and in unstable boreholes
- Borehole stabilisation with cement slurry (optional)
- Dynamic grouting during drilling (optional)
- Grouting assured over full depth of borehole
- No need to extract drill strings
TITAN grout umbrella
Temporary forepoling for trouble-free driving
Temporary forepoling for trouble-free driving
TITAN hollow steel bars are suitable for:
- tunnel roof stabilisation well ahead of the working face
- stabilising fault zones
- stabilising thin overlying strata
- reducing settlement
- ground improvement through dynamic grouting
- and can be used as an alternative to a pipe umbrella
TITAN SELF-DRILLING SPILES
(grouting spiles)
(grouting spiles)
TITAN hollow steel bars are used for:
- stabilisation ahead of the working face
- safeguarding operations at the working face
- ground improvement through dynamic grouting
- stabilisation of blocks and fault zones at the crown
TITAN working face anchors
TITAN micropiles are used for:
- working face stabilisation in squeezing rock masses
- working face stabilisation when using pipe umbrellas or TITAN grout umbrellas
- ground improvement through dynamic grouting
- temporary support
TITAN ROCK BOLTS & TITAN RADIAL BOLTING
TITAN hollow steel bars are suitable for:
- systematic anchorages
- accommodating rock pressure
- local stabilisation of blocks and fault zones
- follow-up rock stabilisation
- ground improvement through dynamic grouting
- temporary support
TITAN springing point piles
TITAN micropiles help to strengthen the springing points.
- According to DIBt approval Z-34.14-209
- For temporary or permanent applications
IQ-Quickset Roofbolts
Secure support in minutes
Secure support in minutes
The IQ-Quickset Roofbolt® is a self-drilling anchor that is drilled and grouted with a two-part resin in one operation. It can be loaded within minutes and is used for:
- immediate stabilisation of tunnel roofs/shafts
- TBM driving
- immediate stabilisation in mining
TITAN micropile
COMPONENTS
COMPONENTS
ONE INSTALLATION METHOD
FOR ALL APPLICATIONS
FOR ALL APPLICATIONS
Irrespective of the ground conditions and the particular application, TITAN micropiles are always installed using the same method.
- Also suitable for changing soil conditions
- No separate casing
- No multi-stage grouting
- Installation according to approval Z-34.14-209
- 1 operation – 2 steps
APPROVED SYSTEM
TEMPORARY & PERMANENT
TEMPORARY & PERMANENT
TITAN micropile
- Complies with DIN EN 14199
- National Technical Approval Z-34.14-209 (DIBt)
More Info
References
