Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Geotechnical systems
with TITAN micropiles
One system – many applications
The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.
Trench shoring systems
The ISCHEBECK trench shoring systems in steel and aluminium meet the requirements for fast progress on site, economic plant use and high safety. The modular system consisting of panels and trench struts ensures good flexibility and solutions to suit the needs of building sites.
Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Formwork
Formwork solutions from ISCHEBECK are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All ISCHEBECK formwork products are versatile in use and carefully matched to the particular needs of building sites.
Centering and engineering structures
ISCHEBECK can supply many different solutions that cut formwork setup times.
The modular form of numerous products and systems allows them to be easily combined.
Safety and logistics in construction
TO DIN EN 13374 CLASS A
Fencing off an edge from which persons could fall should never take longer than the work to be done near that edge.
It is the small number of parts and the ease of use that are the real benefits of ISCHEBECK edge protection systems. The systems are flexible in use and represent a major contribution to the safety of persons on building sites.
Formwork
Formwork solutions from ISCHEBECK are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All ISCHEBECK formwork products are versatile in use and carefully matched to the particular needs of building sites.
TITAN telescopic props
in steel and aluminium
The right support for every job
From telescopic props to system legs in aluminium ‒ the ISCHEBECK range of props covers the whole range:
- simple storey-high slab formwork
- large single-storey sheds
- tall falsework
Slab formwork systems
Economic, safe operations and very easy handling
Flexible - economic - safe
Whether for simple slab formwork one-storey high or tall single-storey sheds covering large areas:
ISCHEBECK slab formwork systems
- consist of just a few parts
- are economic and flexible
- are lightweight and easy to handle
TITAN formwork for openings
System formwork for doors and windows
System formwork for doors and windows
The economic alternative for wall openings with recurring dimensions:
- for wall thicknesses from 200 to 300 mm
- simple, infinite adjustment for setting the required opening size
- lightweight and robust aluminium parts
- stable parts = accurate dimensions
- reusable
Erection aids
Push-pull props and erection of precast concrete elements
Push-pull props and erection of precast concrete elements
The ISCHEBECK modular construction system offers erection aids for the support of precast elements (wall and floor).
TITAN M aluminium wall form elements
The modular wall formwork with aluminium frame
The modular wall formwork with aluminium frame
TITAN M = lightweight aluminium frame with multipurpose slot, welded walings, free choice of sheeting, easy to connect and separate.
- Prefabricated elements in heights of
0.625, 1.25 and 2.75 m - Comprehensive accessories
TITAN beam formwork
Flexible, fast formwork for beams
Flexible, fast formwork for beams
U-HV beam clamps and UZ beam side frames for downstand beams, changes in soffit level, T-beams and edge beams
- Just a few system components
- Low weight
- Easy depth and width adjustment
- Quick, easy erection
- Can be combined with the formwork systems of other suppliers
TITAN formwork accessories
The right accessories for every kind of formwork
The right accessories for every kind of formwork
The formwork ties are approved to DIN 18216, the hot-rolled DYWIDAG thread is not susceptible to damage or low-temperature embrittlement and the quick-action thread is self-cleaning and vibration-proof.
- Tie bar 15 – perm. load 90 kN
- Tie bar 20 – perm. load 160 kN
- Tie bar 26.5 – perm. load 300 kN
Accessories: hexagonal nuts, hexagonal couplers, wing and flange nuts, threaded waling plates, welding nuts, waterstops, etc.
TITAN M aluminium wall form elements
The modular wall formwork with aluminium frame
The modular wall formwork with aluminium frame
TITAN M = lightweight aluminium frame with multipurpose slot, welded walings, free choice of sheeting, easy to connect and separate.
- Prefabricated elements in heights of
0.625, 1.25 and 2.75 m - Comprehensive accessories
TITAN M aluminium wall form elements
Heights, widths, internal corners
Heights, widths, internal corners
Prefabricated forms, 0.625 m high
- Widths: 2.00 m; 1.25 m; 0.75 m; 0.50 m
- Internal corner: 0.55 x 0.55 m
Prefabricated forms, 1.25 m high
- Widths: 2.00 m; 1.25 m; 0.75 m; 0.50 m
- Internal corner: 0.55 x 0.55 m
Prefabricated forms, 2.75 m high
- Widths: 2.00 m; 1.25 m; 0.75 m; 0.50 m
- Internal corner: 0.55 x 0.55 m
Accessories for aluminium wall forms TITAN M
For example:
- Aluminium external corner, 55 x 55 cm
- Aluminium double channel waling
- Adjustment spanner
- Tubular jack
- Concreting chute
- Tie bolt
- Height adjuster on skid plate
- Group of three swivel castors
