Steel in water engineering,
September 19-20, 2019,
Brunswick, Germany
Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Geotechnical systems
with TITAN micropiles
One system – many applications
The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.
Trench shoring systems
The ISCHEBECK trench shoring systems in steel and aluminium meet the requirements for fast progress on site, economic plant use and high safety. The modular system consisting of panels and trench struts ensures good flexibility and solutions to suit the needs of building sites.
Formwork systems
Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.
Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.
Formwork
Formwork solutions from ISCHEBECK are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All ISCHEBECK formwork products are versatile in use and carefully matched to the particular needs of building sites.
Centering and engineering structures
ISCHEBECK can supply many different solutions that cut formwork setup times.
The modular form of numerous products and systems allows them to be easily combined.
Safety and logistics in construction
TO DIN EN 13374 CLASS A
Fencing off an edge from which persons could fall should never take longer than the work to be done near that edge.
It is the small number of parts and the ease of use that are the real benefits of ISCHEBECK edge protection systems. The systems are flexible in use and represent a major contribution to the safety of persons on building sites.
More Info
References
Safety and logistics in construction
TO DIN EN 13374 CLASS A
Fencing off an edge from which persons could fall should never take longer than the work to be done near that edge.
It is the small number of parts and the ease of use that are the real benefits of ISCHEBECK edge protection systems. The systems are flexible in use and represent a major contribution to the safety of persons on building sites.
TITAN Aluminium EPS
Just two components
Just two components
- Just two components = quick and easy erection
- Lightweight = 5.5 kg/m edge protection (16.5 kg/screen)
- Approved for heights up to 100 m above ground level
- Aluminium frame (Ø48 mm) compatible with standard scaffold tube couplers
TITAN H guard rail post
Permissible impact load 0.3 kN
Permissible impact load 0.3 kN
- Easy to use thanks to manual crank handle at convenient height
- Thread protected in hollow steel post
- Can be used with 150 x 30 mm edge protection boards, grade S10 or better
- Max. 40 cm slab depth
- Approved for heights up to 40 m above ground level
- Paint finish
TITAN HS guard rail post
Permissible impact load 1.5 kN
Permissible impact load 1.5 kN
- Compatible with standard scaffold tube couplers (Ø48 mm post)
- Nut with integral tommy bar for secure fixing
- Nailing holes in board retainers for secure fixing of handrails and intermediate rails
- Can be used with 150 x 30 mm edge protection boards, grade S10 or better
- Max. 35 cm slab depth
- Approved for heights up to 40 m above ground level
- Galvanised
Aluminium handrail frames
Safe access! The aluminium handrail frames are simply attached to the aluminium ledger frames and can extend over more than one scaffold bay.
- Complies with DIN EN 12811
- Available in two sizes (1250 and 1800 mm c/c)
More Info
References
