Formwork systems

Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.

Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.

Geotechnical systems

with TITAN micropiles

One system – many applications

The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.

Trench shoring systems

The ISCHEBECK trench shoring systems in steel and aluminium meet the requirements for fast progress on site, economic plant use and high safety. The modular system consisting of panels and trench struts ensures good flexibility and solutions to suit the needs of building sites.

Formwork systems

Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.

Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.

Formwork

Formwork solutions from ISCHEBECK are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All ISCHEBECK formwork products are versatile in use and carefully matched to the particular needs of building sites.

Centering and engineering structures

ISCHEBECK can supply many different solutions that cut formwork setup times.

The modular form of numerous products and systems allows them to be easily combined.

Safety and logistics in construction

TO DIN EN 13374 CLASS A

Fencing off an edge from which persons could fall should never take longer than the work to be done near that edge.
It is the small number of parts and the ease of use that are the real benefits of ISCHEBECK edge protection systems. The systems are flexible in use and represent a major contribution to the safety of persons on building sites.

More Info

References

Formwork

TITAN telescopic props

in steel and aluminium

The right support for every job

From telescopic props to system legs in aluminium ‒ the ISCHEBECK range of props covers the whole range:

simple storey-high slab formwork
large single-storey sheds
tall falsework

Slab formwork systems

Economic, safe operations and very easy handling

Flexible - economic - safe

Whether for simple slab formwork one-storey high or tall single-storey sheds covering large areas:

ISCHEBECK slab formwork systems

consist of just a few parts
are economic and flexible
are lightweight and easy to handle

TITAN formwork for openings

System formwork for doors and windows

The economic alternative for wall openings with recurring dimensions:

for wall thicknesses from 200 to 300 mm
simple, infinite adjustment for setting the required opening size
lightweight and robust aluminium parts
stable parts = accurate dimensions
reusable

Erection aids

Push-pull props and erection of precast concrete elements

The ISCHEBECK modular construction system offers erection aids for the support of precast elements (wall and floor).

TITAN M aluminium wall form elements

The modular wall formwork with aluminium frame

TITAN M = lightweight aluminium frame with multipurpose slot, welded walings, free choice of sheeting, easy to connect and separate.

Prefabricated elements in heights of
0.625, 1.25 and 2.75 m
Comprehensive accessories

TITAN beam formwork

Flexible, fast formwork for beams

U-HV beam clamps and UZ beam side frames for downstand beams, changes in soffit level, T-beams and edge beams

Just a few system components
Low weight
Easy depth and width adjustment
Quick, easy erection
Can be combined with the formwork systems of other suppliers

TITAN formwork accessories

The right accessories for every kind of formwork

The formwork ties are approved to DIN 18216, the hot-rolled DYWIDAG thread is not susceptible to damage or low-temperature embrittlement and the quick-action thread is self-cleaning and vibration-proof.

Tie bar 15 – perm. load 90 kN
Tie bar 20 – perm. load 160 kN
Tie bar 26.5 – perm. load 300 kN

Accessories: hexagonal nuts, hexagonal couplers, wing and flange nuts, threaded waling plates, welding nuts, waterstops, etc.

More Info

References

TITAN telescopic props

in steel and aluminium

The right support for every job

From telescopic props to system legs in aluminium ‒ the ISCHEBECK range of props covers the whole range:

simple storey-high slab formwork
large single-storey sheds
tall falsework

TITAN S telescopic props

• 1.75 - 5.50 m
• comply with DIN EN 1065
• steel prop

ISCHEBECK steel props exceed all the requirements of DIN EN 1065 “Adjustable telescopic steel props”

1.8 – 3.0 m (size 2) – class B/D
2.3 – 3.5 m (size 3) – class B/D
2.6 – 4.1 m (size 4) – class C/D
4.0 – 5.5 m (size 7) – class C/D

Choice of painted or hot-dip galvanised finish for corrosion protection to EN 39

TITAN E35 Telescopic Prop

• 2.05 – 3.50 m
• galvanised steel prop
• load up to 48 kN

With its extension range, the prop covers the most common floor heights in residential and commercial construction.

Protected inner thread
Head and base plates with well-proven fixing holes
Weight 24 kg
According to DIN EN 1065

TITAN HV adjustable legs

• 1.75 – 4.25 m
• up to 6.10 m as support tower
• Loads up to 96 kN

This prop with aluminium outer tube and steel screw jack can be easily extended so that the formwork needs of 75% of all storey heights can be covered with just one prop size!

Available in two sizes (HV: 1.75 – 3.05 m; HV Maxi: 2.95 – 4.25 m)
Increased loadbearing capacity when used as four-leg tower
Many applications: floor slab formwork, temporary propping, support for edge beams, table forms

TITAN adjustable aluminium leg

• 1.70 – 5.50 m
• up to 24 m as support tower
• Loads up to 128 kN

The TITAN adjustable aluminium leg is THE system leg for great heights. Combined with aluminium ledger frames, it is possible to construct large falsework units.

TITAN adjustable aluminium legs are ideal for a huge range of applications: floor slab formwork, temporary propping, support for edge beams, table forms, falsework, mobile formwork, etc.

Available in three sizes: size 2 (1.70 – 2.90 m), size 4 (2.90 – 4.10 m), size 6 (4.30 – 5.50 m)
Extendable

TITAN SLS aluminium heavy-duty prop

• with hydraulic jack
• defined prestress up to 250 kN

The aluminium heavy-duty prop is ideal for refurbishment jobs where prop loads are known beforehand.

Required prestress can be set exactly
Pressure gauge for full control
Spanner for easy raising and lowering
Flexible height adjustment from 1.80 to 4.80 m
Economic because it uses the basic parts of the TITAN aluminium Megashore system

Universal tripod

For secure support

Secure stand for all customary telescopic props
Folds for space-saving storage and transport

More Info

References

Search