Formwork systems

Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.

Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.

Geotechnical systems

with TITAN micropiles

One system – many applications

The heart of the system is the self-drilling TITAN micropile, which can be used as a ground improvement measure. Ground improvement by way of the interlocking body of grout enables tension, compression and cyclic loads to be transferred to the in situ soil. TITAN micropiles are covered by National Technical Approval Z-34.14-209 issued by the DIBt. This is the only tubular grouted pile system that can also be used for permanent applications of 100+ years.

Trench shoring systems

The ISCHEBECK trench shoring systems in steel and aluminium meet the requirements for fast progress on site, economic plant use and high safety. The modular system consisting of panels and trench struts ensures good flexibility and solutions to suit the needs of building sites.

Formwork systems

Most parts in the ISCHEBECK formwork systems are made from aluminium. The low weight of the individual components improves safety, reduces fatigue and saves on crane capacities.

Whether a single prop or a complete falsework assembly, ISCHEBECK always supplies economic solutions ideally suited to the needs of building sites.

Formwork

Formwork solutions from ISCHEBECK are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All ISCHEBECK formwork products are versatile in use and carefully matched to the particular needs of building sites.

Centering and engineering structures

ISCHEBECK can supply many different solutions that cut formwork setup times.

The modular form of numerous products and systems allows them to be easily combined.

Safety and logistics in construction

TO DIN EN 13374 CLASS A

Fencing off an edge from which persons could fall should never take longer than the work to be done near that edge.
It is the small number of parts and the ease of use that are the real benefits of ISCHEBECK edge protection systems. The systems are flexible in use and represent a major contribution to the safety of persons on building sites.

More Info

References

Formwork

TITAN telescopic props

in steel and aluminium

The right support for every job

From telescopic props to system legs in aluminium ‒ the ISCHEBECK range of props covers the whole range:

simple storey-high slab formwork
large single-storey sheds
tall falsework

Slab formwork systems

Economic, safe operations and very easy handling

Flexible - economic - safe

Whether for simple slab formwork one-storey high or tall single-storey sheds covering large areas:

ISCHEBECK slab formwork systems

consist of just a few parts
are economic and flexible
are lightweight and easy to handle

TITAN formwork for openings

System formwork for doors and windows

The economic alternative for wall openings with recurring dimensions:

for wall thicknesses from 200 to 300 mm
simple, infinite adjustment for setting the required opening size
lightweight and robust aluminium parts
stable parts = accurate dimensions
reusable

Erection aids

Push-pull props and erection of precast concrete elements

The ISCHEBECK modular construction system offers erection aids for the support of precast elements (wall and floor).

TITAN M aluminium wall form elements

The modular wall formwork with aluminium frame

TITAN M = lightweight aluminium frame with multipurpose slot, welded walings, free choice of sheeting, easy to connect and separate.

Prefabricated elements in heights of
0.625, 1.25 and 2.75 m
Comprehensive accessories

TITAN beam formwork

Flexible, fast formwork for beams

U-HV beam clamps and UZ beam side frames for downstand beams, changes in soffit level, T-beams and edge beams

Just a few system components
Low weight
Easy depth and width adjustment
Quick, easy erection
Can be combined with the formwork systems of other suppliers

TITAN formwork accessories

The right accessories for every kind of formwork

The formwork ties are approved to DIN 18216, the hot-rolled DYWIDAG thread is not susceptible to damage or low-temperature embrittlement and the quick-action thread is self-cleaning and vibration-proof.

Tie bar 15 – perm. load 90 kN
Tie bar 20 – perm. load 160 kN
Tie bar 26.5 – perm. load 300 kN

Accessories: hexagonal nuts, hexagonal couplers, wing and flange nuts, threaded waling plates, welding nuts, waterstops, etc.

More Info

References

Erection aids

Push-pull props and erection of precast concrete elements

The ISCHEBECK modular construction system offers erection aids for the support of precast elements (wall and floor).

TITAN push-pull props

Support for precast elements and wall/column formwork

Whether in steel or lightweight aluminium, the four products in the ISCHEBECK push-pull prop range are suitable for the quick alignment and secure support of precast concrete elements as well as wall and column formwork. In terms of height and alignment, this versatile, coordinated range is flexible and economic. All TITAN push-pull props are suitable for tension and compression loads. The swivelling end plates enable the props to be set up at any angle.

System Options for supporting precast concrete slabs and elements

For partially and fully precast floor slabs

Combining TITAN aluminium formwork beams with the ISCHEBECK range of props ensures optimum support for precast concrete floor slabs with just a few components. The systems can be adjusted to suit all requirements, e.g. height, slab thickness, beam spacings and prop loads.
The wall-mounted supports complement the system, represent an alternative to traditional falsework and round off the range of support options for precast concrete elements.

More Info

References

Search